Fossils in stone: acid preparation of fossils

Christian Baars

A limestone rock, from Southerndown in south Wales, containing fossil shells. (Gryphaea arcuata — Devil's toenails).

Fossil shells (Gryphaea arcuata – Devil's toenails) after the rock has been dissolved in acid.

A fossil bivalve shell that has been partially prepared using acid. The two parts of the shell (the valves) are still attached to each other, and the bottom valve is still attached to the rock.

We rarely find fossils in perfect condition. When we collect them, most of them are partially or almost completely concealed in rock. To study them in detail, or to prepare them to be displayed, we must carefully remove the rock.

It's not easy to remove the rock from the fossils, which are sometimes extremely delicate. It can be a long and painstaking process. Sometimes we use hand tools, like pins, scrapers or little chisels. We can also use specialist tools, like pneumatic pens similar to engraving devices. A third option is to use an air-abrasive machine that is little like a miniature sandblaster.

An alternative is to dissolve the rock in acid. Most fossil shells were composed originally of calcium carbonate, and many are preserved in

limestone, which is the same chemical make-up. In some circumstances, however, the calcium carbonate of the shells dissolves away and is replaced by silica, but the enclosing limestone remains unchanged. Because limestone dissolves readily in acid, but silica doesn't, we can extract these specimens with chemicals.

Vinegar, no salt please

The acid we commonly use is acetic acid — the same acid that is in vinegar. We use highly concentrated acetic acid, 80%, but dilute it with water to about 5%.

We immerse the rock sample containing fossils in the diluted acetic acid, which almost immediately starts to fizz as it reacts with the limestone.

The rock can take anything from a few days to many months to dissolve completely, depending on its specific composition. The reaction with the rock gradually neutralizes the acid, which needs to be refreshed from time to time. At the end of the process all that remains is some slushy rock residue, and the silicified fossils.

Many silicified fossils are very delicate; they have to be handled with extreme care, and we often need to strengthen them with adhesives.

The fossils are now ready for research or for displaying. Many are exquisitely preserved: 450-million-year-old silicified shells sometimes look as if they have just been picked up from a modern beach!

Comments (11)

Comments are currently unavailable. We apologise for the inconvenience.
Luke
18 February 2022, 16:08

My wife and I just purchased a property in North Texas, about 30 miles west of Fort Worth. We have what looks like the "Devil's toenails" by the hundreds preserved in larger pieces of limestone as well as individual specimens scattered across the surface of our yard. The previous owners had a new septic system installed a couple of years ago so I suspect these were dug up during that process. My daughters and I have been collecting them and setting them aside for further investigation but by the looks of some of the previous comments, they are fairly common in this area. Would love to get more info if possible. Thank you.

Barry Slemmings
25 September 2021, 23:00
I recently found a handsome iron pyrite ammonite. Only the edge is showing all the way around, it is about 150mm across and appears complete. I want to remove the matrix from at least one side (one to two cm thick) and I think it would be a handsome specimen. Any suggestions about whether acetic or hydrochloric acid will help or harm? My understanding is that calcite ammonites respond badly to acid treatments. What about pyrite ones?
Barry
Eric
29 March 2021, 04:21
There are places in Fort Worth, Texas where there are slabs of rock containing these devil's toenails by the million. As the rocks decay out of the sides of outcroppings, there are piles of these shells sitting loose. Very amazing indeed.
Cindy Howells Amgueddfa Cymru – Museum Wales Staff
4 January 2021, 16:45
Trevor,
It's amazing to find fossils like this anywhere. I'm afraid that we can't identify or comment about any without good photographs though. If these are from Texas it might be worth you contacting your nearest museum with a geological curator.
27 December 2020, 00:51
Trevor- where in Texas? I’ve recently found several in a limestone creek bed near Dallas, Texas.
Trevor
13 December 2020, 19:04
I have alot of these. I continue to find these till this day on my grandfather's land here in texas. If I could have more information on these I would love it . Are they worth anything?
Nia Evans Amgueddfa Cymru – Museum Wales Staff
18 November 2020, 14:52

Dear Jenny Kenward,

Thank you for getting in touch with us. I have passed your enquiry to my colleagues within the natural sciences department. They will be able to advise further on this.

Many thanks,

Nia
(Digital team)

Jenny Kenward
13 October 2020, 22:28
Hi I am starting a small collection of rocks and minerals for my grandson and each one will have a info card with it. (I know you can’t give an exact date) I have a fossilised devils claw. Could you give me a bit of information about them. Many thanks.
Daniel
11 July 2020, 20:35
My mum got me a largeish chunk of limestone with a few visible shells in it. I'm disolving it in white vinegar is such a thing doable? How often will I have to change the vinager? My goal isn't to totally disolve it just expose hidden fossils inside. The limestone comes from keates quarry in Dorset (near where they found the dinosaur tracks)
Amanda Valentine-Baars Amgueddfa Cymru – Museum Wales Staff
8 June 2020, 09:06

Hi Cindy,
As a general rule the acid should be refreshed when it stops fizzing. it is all dependent on the type of acid being used and the rock type that you are dissolving.
Kind Regards,
Amanda
(Senior Laboratory Officer (Natural Sciences) - National Museum Wales)